Saving is the order of the day – especially when it comes to water. Why should you use valuable drinking water to water your garden or clean your terrace? For cost reasons and for the obvious reason of ecological sustainability, it is advisable here to reach for a garden pump with which you can use your existing or, even better, collected water. With the TGP 1005 E, which is finally available again, you can water your flowerbeds and vegetable beds, trees and shrubs with free service water and not waste expensive drinking water. And best of all: the pump is equipped with a fine filter for protection against dirt particles as small as 1mm!
The powerful garden pump TGP 1005 E provides you with free water at the touch of a button – whether from a well, a cistern, a rain barrel or a natural water course. With its powerful 1,000 watt output, it pumps up to 3,300 litres of service water per hour. The TGP1005 E has a practical pre-filter against dirt particles from a size of 1 mm. This not only cleans the pumped water, but also protects the pump from dirt and internal damage.
Your benefits at a glance – The Garden Pump TGP 1005 E …
- pumps up to 3,300 litres of service water per hour or 55 litres per minute with 1,000 watts of power and can suck in water from a lower point with a suction height of up to 7 metres – e.g. From a pond, a well, a cistern or a flowing body of water. The extracted water is transported away by the pump up to a delivery height or distance of 42 metres.
- has a pre-filter that retains coarse dirt, small stones or plant parts from a size of 1 mm. This protects the inside of the pump from contamination or damage. The cap is particularly easy to open with the supplied wrench.
- enables you to conveniently water flowerbeds, vegetable beds, trees, shrubs, lawns and front gardens by using sprinklers, sprayers, shower heads or Micro-Drip systems. The convenient use of this garden pump is also recommended for pumping out or recirculating the water seasonally in ponds or water barrels.
- is turned on and off manually using a switch. Thanks to its large filler opening, it is really easy to fill the pump with some water before you start it up. If stored for longer periods, for instance in winter, any residual water should drained out using the water drain screw – thereby protecting the TGP 1005 E against potential frost damage.
- has a pump housing that is splash-proof from all directions in accordance with protection class IPX4 and is made of impact-resistant plastic and metal with a protective coating. In addition, the pump has a high-quality ceramic mechanical seal, robust metal threads on the intake and pressure side, high corrosion resistance of the maintenance-free aluminium winding motor and an integrated thermal protection circuit in case of overheating. At the intake and pressure connections, the pump has sturdy metal threads with an inner diameter of 1“ or 3.33 cm(G1) respectively.
- can be transported quickly and easily to the desired location using the ergonomically shaped carrying handle. Not forgetting: garden pumps like the TGP 1005 E are suitable for both fixed installations as well as mobile use. For stationary use at a fixed location, a stable pump base with holes for secure fastening is included in the scope of delivery.
Garden Pump TGP 1005 E – brand quality from Trotec
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality: Order the Garden Pump TGP 1005 E today at our current special offer price, reduced from €99.95 to only €49.95 incl. VAT. – now in the Trotec shop!
