Drying in XXL format: The industrial condensation dryer DH 160, which is available again, is characterised by a high dehumidification capacity of up to 245 litres per day (at 30 °C / 80 % r.h.) and practical equipment options. The robust industrial dryer, which, by the way, is 100% Trotec in development, design and production, guarantees consistently high dehumidification performance – in continuous operation and also at low temperatures. Best of all: the the condensation dryer can be installed immediately without any additional construction measures. Simply set it up, connect to the power supply and lay the condensate discharge hose – done.
It robust design with high dehumidification performance and easy installation make the DH 160 an effective all-purpose solution for a wide range of applications, for example, from keeping production facilities and storage rooms dry with specific humidity requirements to humidity control in data centres or in the food industry, for example, in cheese dairies or confectionery production. Designed for stationary operation, the industrial condensation dryer DH 160 can also be easily used in wall-mounted operation or installed under the ceiling and connected to existing air duct systems, if the on-site preparation has been made. The professional device can also be installed immediately afterwards.
Your benefits at a glance – the Industrial Condensation Dryer DH 160…
- has a smooth-running scroll compressor for constant, pulsation-free pressure for energy-efficient cooling. In combination with its self-regulating EC centrifugal fan, this robust industrial dryer ensures consistently high dehumidification performance in continuous operation even at low temperatures.
- removes most of the moisture from the air in large-volume recirculation mode according to the target moisture content pre-selected by the hygrostat. The double-flow, continuously self-regulating EC centrifugal fan and the high-performance compression refrigeration system of the DH 160 ensure high efficiency.
- simultaneously heats the process technology heats the dry air supplied to the room, so that the use of conventional heating and ventilation energy can be noticeably reduced. Due to an efficiency (COP) of 2.9, the DH 160 is able to simultaneously generate 2.9 kW of heat output during dehumidification from every kilowatt of energy consumed.
- works thanks to its professional hot has defrosting with automatically controlled cycle inversion. In this process, the refrigerant circuit is briefly reversed via a four-way valve to keep the evaporator free of ice, so that the previously cold evaporator now becomes a hot condenser and vice versa. Compared to hot gas defrosting by bypass method, the cycle inversion causes faster defrosting, which improves the efficiency and thus increases the net overall system effectiveness of this dehumidifier.
Optimally adaptable to your requirements as an option
Even the standard version of the DH 160 is highly resistant to corrosion by environmental influences thanks to its galvanised, powder-coated steel construction and can also be additionally adapted for special requirements:
Stainless steel version
Ideal for use in areas with special hygiene requirements or particularly reactive air environments. The stainless steel housing is easy to clean and made of AISI 316 material, which is particularly resistant to various chemical solutions such as sulphuric acid and iodides. In addition, AISI 316 has a very high resistance to corrosion, especially to chlorides.
Heat exchanger with KTL coating
Ideal for use in particularly reactive air environments. Thanks to cathodic dip painting (KTL), the coating of the heat exchanger is resistant to solvents and corrosion as well as to acids and alkalis.
High pressure fan
The fan is available with a static pressure increase (200 Pa) for larger volume flows, which means that longer air transport distances are possible, for example when connecting to existing air duct systems.
Defrosting below 0 °C
To lower the dew point in particularly cold environments, such as cold rooms, a temperature extension is available for the DH 160, which extends its operating range to -0,5 °C – +42 °C.
Industrial Condensation Dryer DH 160 – Brand quality from Trotec
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. Order today at our current special offer price:
- the industrial condensation dryer DH 160 BX for only €11,894.05
- the industrial condensation dryer DH 160 in stainless steel design for only €16,005.50
incl. VAT. – now in the Trotec shop!
