You can hardly heat more efficiently than with the infrared heating panel TIH 400 S, which is finally available again. Because the power consumption of only 450 watts is matched by a heating output of up to 450 watts. So what goes in in terms of electrical energy comes again in terms of heat output. In addition, the elegant spot supplementary heater is just as impressive in living areas as it is as the only source of heat in previously unheated rooms, such as hobby rooms or for commercial use, for example in the catering trade, at cool work-places in the warehouse or even in building drying or renovation.
Whether in living areas, warehouses and workshops or in the catering trade – the flexible infrared heating panel TIH 400 S only needs a power socket for its heating operation. Simply plug it in, switch it on and enjoy the cosy warmth. As an additional spot heater, the infrared flat heater TIH 400 S with up to 450 watts of clean heat creates warmth directly where you need it. This is the optimal solution when conventional warm air heaters reach their limits due to process-related reasons or when rooms that were previously unheated are to be equipped with an effective heat source without expensive conversions.
- For heating living rooms
Whether in living rooms, conservatories or bathrooms, as a selective, auxiliary heater the infra-red heating panel creates heat right where it’s needed by the occupants. It can also be mounted on the wall to save space and only needs a standard socket for heating. The TIH 400 S is also a cost-effective heating alternative when converting rooms without heating, for example a hobby cellar.
- For use in gastronomy
As a free-standing or wall-mounted device, the TIH 400 S infra-red heating panel is the ideal solution for selective heating of sales stands or terraces, and additionally is much more effective than conventional gas heaters. Smoking areas in outdoor areas can also be heated effectively.
- For drying wall surfaces faster
In construction or refurbishment sites, the infra-red heater causes a capillary of moisture to be transported in the direction of the heated wall surface because of the temperature gradient, which in contrast to the quick diffusion, is clearly able to transport more moisture from the wall.
- For workplace heating
As a floor-standing or wall-mounted unit, the infrared spot heating of the TIH 400 S also offers great heat in draughty or cool workplaces, for example in warehouses, behind refrigerated counters, in kiosks, at trade fairs or exhibitions, in churches, in workshops, hobby rooms or large halls. Particularly convenient: hall areas without people do not have to be heated at the same time, which is expensive.
Further benefits at a glance – the Infrared Heating Panel TIH 400 S …
- provides up to 450 watts of clean heating power with a maximum efficiency of 100 % of the electrical energy used. Because the heat is transported via light waves with direct object heating without convective loss due to heating of the ambient air.
- generates direct heat via infrared radiation according to the natural principle of the sun without convective loss. The environmentally friendly IR-C radiation directly heats all objects in the room, thus not only are people heated, but walls, ceilings, floors and furniture as well, which then gradually give off the stored heat into the room. This makes the heating panel TIH 400 S a cost-effective replacement heater, for example for old buildings with night storage heaters.
- provides absolutely clean heat: no noise, no odours, no condensation, no oxygen consumption, no unpleasant dispersion of dust.
- impresses with a sophisticated design, which allows for a wide range of assembly variants: an integrated fitting on the rear side makes both horizontal and vertical wall attachment easy. What’s more, feet, which are available as an option, allow it to be used as a free-standing unit, and the mounting clips available as an accessory allow the unit to be attached to standard mounting supports.
- is ready for immediate use, as no additional installations or expensive conversions are required.
Save more energy costs – with professional accessories from Trotec
Optimum room temperature control with the socket thermostat BN30: simply attach it to the socket and connect the heating or cooling device to the socket thermostat BN30 , and you can have your heating or cooing device switched on and off automatically by the BN30. The socket thermostat, which is available as an accessory, can be individually controlled within a temperature range of 5 °C to 30 °C.
Reduced from €24.95 to only €19.95 incl VAT. – now in the Trotec Shop!
Radio Thermostat BN35 with timer for the socket: With the Radio Thermostat BN35, you can easily determine, using a remote control, at which room temperature your heating or cooling device switches on or off. The BN35 set consists of a radio-controlled socket and a radio-controlled thermostat. Simply plug the radio-controlled socket into a wall socket and connect your heating or cooling unit to the socket in the radio-controlled plug. Place the radio thermostat within a radius of approx. 20 metres where the room temperature is to be measured. Alternatively, time-controlled regulation is also possible.
Reduced from €49.94 to only €39.95 incl. VAT – now in the Trotec shop!
Infra-red Heating Panel TIH 400 S – brand quality from Trotec
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. Order the Infrared Heating Panel TIH 400 S today at our current special offer price of only €149.95 incl. VAT – now in the Trotec shop!
