The new 10-piece sandpaper belt set for woodworking fits perfectly on all commercially available belt sanders with appropriate holders. With different grain sizes from coarse to medium to fine, you always have the right abrasive paper at hand for large-surface sanding work as well as for final score-free sanding. And thanks to its synthetic resin-bonded, fabric-reinforced belts, you benefit from low wear and tea and high removal rates even under heavy loads.
Professional craftsmen and ambitious DIY enthusiasts also need high-quality and thus a long-lasting sandpaper belt. This is exactly why the new 10-piece sandpaper belt set from Trotec is the first choice: The 457 x 75 mm synthetic resin-bonded, fabric-reinforced belts are made of high quality corundum and, with their various grain sizes of 40, 60, 80, 100, 120 to 150, are perfectly suited for any type of wood surface treatment. The set is suitable for all common belt sanders with corresponding holders and is also of course the ideal supplement for the Belt sander PBSS 10‑600 from Trotec.
How it works
The 10-piece sandpaper belt set from Trotec contains 6 different grain sizes. Which grain is best suited for which application depends both on the condition of the original surface and on the desired result, i.e. the desired surface appearance. Our use recommendations:
-
Coarse grain (1 x 40 and 2 x 60)
With the two coarsest grains 40 and 60 you start processing rough surfaces on boards, planks or old furniture. The coarse-grained sandpaper removes a lot of material in a short time – so you can make rapid and effective progress and remove scratches, bumps or unevenness particularly well. However, the sanded surface is still relatively rough.
-
Medium grain (1 x 80 and 2 x 100)
With the 80 and 100 grain size grinding belts, you can further refine your work results. Varnish and glue residues can also be removed with them with outstanding results. An already very smooth wood surface can be roughened slightly to the ideal degree with grinding belts of a medium grain for later varnishing.
-
Fine grain (2 x 120 and 2 x 150)
The two densest sand paper grains 120 and 150 are recommended for the perfect finish. This allows you to sand the wood surface so finely that you can feel a silky smooth surface with your hand. This fine tuning is also the best preparation to further treat the wood with oil or wax.
Four of many advantages that I particularly like:
- The 10-piece professional set – for a wide range of wood sanding tasks
- the 6 grain sizes – from coarse to fine
- the 457 x 75 mm format – for all common belt sanders with suitable holders
- the high load-bearing capacity thanks to the high-quality belt
10-piece sandpaper belt set – affordable brand quality from Trotec
Order the 10-piece sandpaper belt set today at our current offer price for just £4.84 instead of £9.65 incl. VAT – now in the Trotec shop!
Please note: Delivery start from CW 34
