Four cutting-edge sets and a solo diamond solution from Trotec – our new brand cutting discs are compelling for all hand-held angle grinders. You can own the trusted professional Trotec brand quality, including MPA test certificate, and unite high cutting performance and a long service life at an extremely affordable price. Each cutting disc is produced in compliance with high quality and safety standards according to EN 12413, or fordiamond-cutting discs, according to EN 13236.
From the offset stone cutting disc in the 5-pack special offer package to the cutting and roughing disc special offer package with 11 discs for stone and metal to the INOX metal cutting disc in the 12-pack special offer package, from the diamond cutting disc set to individual diamond cutting disc AD 230 DB – all of our professional cutting discs have a long service life and corresponding performance for easy separation with clean cutting edges. Best of all: they fit on all hand-held angle grinders.
1. AD 125 S stone cutting disc in the 5-pack special offer package
The AD 125 S is an offset, powerful stone cutting disc for cutting granite, concrete, masonry, lime sandstone, and natural and artificial stone. Due to the offset shape of the AD 125 S, the disc structure is additionally reinforced, which contributes to improvement of a stable and straight cut. With a grain size of 30, degree of hardness P and cutting width of 3.2 mm for a longer service life, it is the ideal solution for fast separation of concrete, natural stone, roof shingles or lime sandstone.
The silicon carbide abrasive on the disc is similar in structure and property to the diamond abrasive grain; it is melted over 2,100°C from quartz sand and petrol coke and exhibits a high heat conductivity, which, along with their hardness, makes the silicon carbide abrasive grains the ideal abrasive material for mineral materials.
The fibre-reinforced synthetic resin bonded fabric keeps the silicon carbide abrasive grains of the AD 125 S stone cutting disc at the ideal distance from one another, thus ensuring the best material properties for tough use and raw dry cuts at a high circumferential speed up to 80 m/s.
Advantages in practical application:
- Professional cutting disc according to EN 12413
- Trotec brand quality with MPA test certificate
- Silicon carbide abrasive for mineral materials
- Grain size 30 (coarse) – optimal for fast and economical cutting work
- Degree of hardness P (hard) – ideal for concrete, natural stone, masonry
- All cutting discs in offset design with fibre-reinforced synthetic resin bonded fabric (BF) for high stability
2.Cutting and roughing disc set in the 11-pack special offer package
All cutting and roughing discs of this set have a fibre-reinforced synthetic resin bonded fabric (BF), which keeps the abrasive grains at an ideal distance from one another, thus ensuring the best material properties for tough use and dry cuts at a high circumferential speed up to 80 m/s. Due to its offset shape, the structure of the cutting discs is also reinforced, which contributes to a stable and clean cut or grind.
AD 125 M metal cutting disc – 5 included in the set
Thanks to a grain size of 36, degree of hardness P and a cutting width of 3.2 mm for a longer service life and load capacity, this cutting disc is the ideal solution for economical cutting of metal and sheet metal. As an abrasive, corundum specially polarised for metal is bound to the D 125 M, which is characterised with extreme toughness as the fourth hardest mineral in the world, which is why it is especially suitable for high cutting performance.
AD 125 S stone cutting disc – 5 included in the set
The silicon carbide on this disc has a high heat conductivity, which, in combination with its hardness, makes the silicon carbide abrasive grains the ideal abrasive material for mineral materials. With a grain size of 30, degree of hardness P and cutting width of 3.2 mm for a longer service life, the AD 125 S is therefore the ideal solution for fast separation of concrete, natural stone, roof shingles or lime sandstone.
AD 125 MG metal roughing disc – 1 included in the set
Corundum specially polarised for roughing metal is bound in this disc in multi-layer fibreglass. Corundum is extremely tough and therefore particularly suitable for high cutting performance with high roughing action. With a 6 mm thickness, grain size of 30 and degree of hardness P, the AD 125 MG cuts very easily even with just a low contact pressure, and is optimally suited for economical processing of welded seams and surfaces.
Advantages in practical application:
-
- Professional cutting disc according to EN 12413
- Trotec brand quality with MPA test certificate
- Complete set for processing stone and metal
- Long service life for effective, cost-saving work
- All cutting discs in offset design with fibre-reinforced synthetic resin bonded fabric (BF) for high stability.
3. AD 125 MI INOX metal cutting disc in the 12-pack special offer package
The AD 125 MI suitable for all hand-held angle grinders is a powerful INOX metal cutting disc and, thanks to a grain size of 60, degree of hardness Q and a cutting width of 1.2 mm, enables clean, fast cuts for economical cutting of stainless steels, with a long service life even in normal steel – with minimal effort and precise processing to the millimetre.
For clean and fast cutting of rust-free steel or stainless steel with hand-held angle grinders, it is imperative that the formula of the cutting disc abrasive is free of iron, sulphur and chlorine in order to reliably prevent rust build-up on the cutting edges. This is of course the case for the professional AD 125 MI metal cutting disc in trusted Trotec brand quality: As the abrasive, corundum with an iron-, sulphur-, and chlorine-free formula, specially polarised for rust-free steel, is bound to this cutting disc. Corundum is the fourth hardest mineral in the world and is characterised by great hardness and toughness, which is why it is especially suitable for high cutting performance.
The fibre-reinforced synthetic resin bonded fabric keeps the corundum abrasive grains of the AD 125 MI stone cutting disc at the ideal distance from one another, thus ensuring the best material properties for tough use and economical dry cuts at a high circumferential speed up to 80 m/s.
Advantages in practical application:
- Professional cutting disc according to EN 12413
- Trotec brand quality with MPA test certificate
- Corundum abrasive specially polarised for rust-free steel
- Grain size 60 (medium) – optimal for fast and economical cutting work
- Degree of hardness Q (hard) – ideal for rust-free steel
- Fibre-reinforced synthetic resin bonded fabric (BF) for high stability
4. Diamond cutting disc set in the 4-pack special offer package
Full-frame, segment and 2 x turbo – all cutting edge types in the practical special offer package and in Trotec brand quality. All diamond cutting discs of this set were produced in compliance with high quality and safety standards according to EN 13236.
AD 110 DW stone cutting disc – 1 included in the set
This sintered diamond cutting disc with a 1.2 mm full-frame and 110 mm diameter impresses with clean, break-free cutting edges while running quietly. The 6 mm wide cutting segment of the AD 110 DW has a high diamond ratio for a long service life and was specially designed for fine processing of fragile materials such as tile, marble or ceramic in wet cutting operations.
AD 115 DD segment diamond cutting disc – 1 included in the set
With thin slots with slot holes, the 8 mm wide cutting segments of the AD 115 DD ensure equally good heat resistance and material transport for fast dry cutting of concrete or roof shingles as well as abrasive materials such as screed. The sintered AD 115 DD segment diamond cutting disc exhibits very good universal properties and its high diamond ratio ensures a long service life.
AD 115 DB turbo diamond cutting disc – 2 included in the set
The AD 115 DB is our universal solution for wet or dry cutting on practically all construction materials. It combines a long service life and high performance for easy cutting with clean cutting edges thanks to the 8 mm turbo cutting edge. This ensures, along with cutting edges with little breakage, effective cooling of the cutting disc. For this reason, you can use the AD 115 DB to economically process a great variety of materials such as concrete, brick, tile, granite or other hard stone and fine stoneware and cut them cleanly and effortlessly with a cutting width of 1.2 mm. Integrated cooling holes thereby ensure good heat dissipation, great running smoothness and reduced noise impact.
Advantages in practical application:
- Professional cutting disc according to EN 13236
- Trotec brand quality with MPA test certificate
- High cutting performance and long service life
- Sintered segment connection with high diamond ratio
- Turbo edge for fast wet and dry cutting (AD 115 DB)
- Segment edge for dry cutting of abrasive materials (AD 115 DD)
- Closed cutting edge for cutting tile (AD 110 DW).
5. AD 230 DB diamond cutting disc with turbo edge
The AD 230 DB diamond cutting disc is our universal solution for wet or dry cutting with hand-held angle grinders and is suitable for economical cutting of practically all construction materials, such as concrete, brick, tile, granite or other hard stone or fine stoneware.
Thanks to its 10 mm turbo cutting edge, it combines a long service life and high work performance for easy cutting of a great variety of materials with a cutting width of 2.5 mm and clean cutting edges. Due to its disc diameter of 230 mm and 80 m/s circumferential speed, the AD 230 DB can cut even larger materials cleanly and quickly in one operation.
The turbo cutting edge ensures, along with cutting edges with little breakage, effective cooling of the cutting disc. In addition, integrated cooling holes of the AD 230 DB offer a double user advantage: On the one hand they ensure good heat dissipation, on the other hand they stabilise the running smoothness of the cutting disc and reduce its noise impact.
Advantages in practical application:
- Professional cutting disc according to EN 13236
- Trotec brand quality with MPA test certificate
- High cutting performance and long service life
- Sintered segment connection with high diamond ratio
- 10 mm turbo edge for fast wet and dry cutting
Cutting discs for all hand-held angle grinders – in Trotec brand quality
Order today at our current offer price:
- The AD 125 S stone cutting disc in the 5-pack special offer package for just £8.26,
- The cutting and roughing set in the 11-pack special offer package for just £8.26,
- The AD 125 MI metal cutting disc in the 12-pack special offer package for just £8.26,
- The diamond cutting disc set 110/115 in the 4-pack special offer package for just £9.17,
- The AD 230 DB diamond cutting disc with a turbo edge for just £9.17,
including VAT. – now in the Trotec shop!
