Oil and gas prices are shooting through the roof. How sensible is it then, to start up the expensive stationary heating system even in the less used rooms in the house and flat? Especially since there is now an inexpensive mobile alternative in a captivating, beautiful form – the design convector TCH 2510 E, which is finally available, can be used as a floor-standing or wall-mounted unit. With its 2,500 watt heating power, which can be continuously adjusted via a thermostat, the convector provides quick, odourless and noise-free warmth. And best of all: the smart device has a window-open detection function and automatically reduces the heat output.
The automatic control of the room temperature and an intelligent automatic heating system further reduce the already economical energy consumption of the design convector TCH 2510 E. The convector also cuts a fine figure in other respects: a large and highly efficient aluminium heating element of around 110 cm in length as well as aerodynamically shaped air outlets on top of the device ensure unrivalled fast heat distribution in rooms measuring up to 30 m² or 75 m³. The prefect mobile heating solution – whether in the living room, bedroom or children’s room, in offices, bathrooms and wellness areas or even in unheated garages, conservatories or holiday homes.
Here’s how it works
The smart TCH 2510 E has energy-saving window-open detection to ensure that energy is not wasted unnecessarily while the window is being ventilated. The convector then reduces the heating output in thermostat-controlled automatic mode until the window is closed again. When the preset desired temperature is reached, (in the range of 0 and 50 °C), the heating element switches off fully automatically and switches on again when reheating is required. In addition, the modern control panel with time and room temperature display is extremely easy to use. All settings, including the programming of individual heating programmes, can be conveniently made using the intuitive function keys and read on the backlit digital display.
The comfort features of the design convector are rounded off by a room temperature and time display, two operating modes (automatic and weekly mode), stable adjustable feet for flexible use in different locations, a wall bracket, an operating hours display and an extra-long power cable for maximum freedom of movement. And with the wall mounting included in the scope of delivery, the unit is mounted in no time and can be removed just as quickly and easily to provide heat elsewhere as a mobile floor-standing unit.
With convectors from the TCH Series, air in the unit is heated by electrically heated wires and consequently rises as warm air, creating a natural suction that draws cold room air into the unit. This creates a constant circulation of warm air flowing into every corner of the room. The heat spreads evenly all around, thus preventing individual areas from becoming overheated or underheated. As soon as the preset heat level is reached, the unit reduces the power and maintains the desired temperature.
Four of the many advantages which I particularly like:
- up to 2,500 W heating output for clean, condensation-free and odourless heat
- the extra-large heating element of approx. 110 cm length
- the adjustable temperature range between 0-50 C°
- the continuous thermostat control
Design Convector TCH 2510 E – affordable brand quality from Trotec!
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. Order the DesignConvector TCH 2510 E at our current special offer price reduced from £141.85 to only £93.77, incl. VAT. – now in the Trotec Shop!
