Whether it is a cavity socket in comparatively soft drywall or a fitting on the worktop of the new kitchen: Trotec’s two new high-quality hole saw sets made from HSS bi-metal and carbide will go through thick and thin with you. Simply clamp all common drills into the drill chuck and get started. Each set contains the most common diameters required for renovation and conversion work on the construction site as well as for furniture or interior fittings.
We have a suitable saw ring for every application and every material. Simply order, unpack and clamp it into the drill chuck of common drills, mark the hole and you’re ready to go: the sharp teeth of the saw rings effortlessly cut the material being processed and enable circular cut-outs from wood, plasterboard, light sheets, tiles, plaster and concrete. Incidentally, despite all DIN (Deutsches Institut für Normung – German National Organisation for Standardisation) standards, the most common applications still require different saw ring measurements. The hardness of the materials that are going to be processed also plays an important role in the selection of a suitable hole saw. That is why we offer you two sets for soft and hard materials – the hole saw sets made from HSS bi-metal and carbide (hard metal).
Hole saw set made from HSS bi-metal
The metal saw set allows plasterboard, PVC, acrylic, tinplate, aluminium, cast zinc, copper, bronze and wood to be easily drilled with a cutting depth of up to 35mm:
- 1 x saw ring Ø 22/28 mm – for cable and pipe ducts
- 1 x saw ring Ø 35 mm – for kitchen fittings
- 1 x saw ring Ø 44 mm – for drain pipes
- 1 x saw ring Ø 68 mm – for sockets and switches
- 1 x saw ring Ø 73 mm – for junction boxes and installation spots
- 2 x hole saw holders with centering drill
(Ø 22 – 35 mm for 10 mm drill chuck, Ø 35 – 73 mm for 13 mm drill chuck)
- 1 x adapter for Ø 35 mm hole saws
- 1 x practical storage case
Hole saw set made from carbide (hard metal)
When the going gets tough, saw rings with hardened carbide teeth, consisting of a cutting depth of up to 25 mm, are recommended for drilling large-scale holes in materials such as tiles, stone, aerated concrete and plaster:
- 1 x saw ring Ø 22/28 mm – for cable and pipe ducts
- 1 x saw ring Ø 35 mm – for fittings
- 1 x saw ring Ø 44 mm – for drain pipes
- 1 x saw ring Ø 68 mm – for sockets and switches
- 1 x saw ring Ø 73 mm – junction boxes and installation spots
- 2 x hole saw holders with centering drill
(Ø 22 – 28 mm for 10 mm drill chuck, Ø 35 – 73 mm for 13 mm drill chuck)
- 1 x 2.5 mm Allen key
- 1 x practical storage case
Metal hole saw sets – in Trotec brand quality
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. It would be best to order the metal hole saw set of your choice today at our current offer prices:
- the hole saw set made from HSS bi-metal
for only £23.87, - the hole saw set made from carbide (hard metal)
for only £19.09,
incl. VAT. – now in the Trotec shop!
