And – is your house well prepared from the impending cold autumn and winter days? Or do you have the infamous ‘cold spots’ here and there? Or do you just need quick and/or additional warmth throughout the house? Then take a look at our new, ultra-flat TCH 1510 E Design Convector – with a heating power, which you can set in increments using a Thermostat, of 1,500 Watts for quick warmth, free of smell or noise. And you can use it as a standing device or attached to the wall! And best of all: The smart Design Convector has an energy-saving open-window-detection function.
In times of Corona, regular ventilation is a must. But to make sure that energy is not wasted unnecessarily when ventilating with the windows, the smart TCH 1510 E has a an energy-saving function which detects when they are open. The convector then puts the heating power down into the thermostat-controlled automatic mode until the window is closed again. That’s smart! The Design Convector makes a good impression in other ways, too: A large-scale and highly efficient, approx. 55 cm long aluminium heating element and aerodynamically shaped air outlets on the upper side of the device ensure that the warmth is distributed around rooms of up to 20 m2 with unmatched speed – exactly to where you need quick and/or additional warmth.
How it works
Just like all other devices in the TCH series, the TCH 1510 E also works to evenly distribute convective heat and can be used for just about any task in private homes or in the office: for example, to quickly replace the main heating in case of a failure, as a reliable interim heating solution before the proper heating starts, or to heat conservatories, garages, hobby rooms or cellar rooms which are not connected to the central heating.
The automatic control of the room temperature and an intelligent automatic warmth system reduce the already economical energy consumption of the TCH 1510 E even further. When the preset desired temperature is reached (between 0 and 50 °C), the heating element switches off completely automatically, and only switches on again when a heating top-up is needed. What’s more, the operating panel with time and room temperature display is characterised by its super easy usability. All settings, right up to the programming of individual heating plans, can be conveniently set using the intuitive function buttons and easily read from the backlit digital display. And, to round off the comfort features, the Design Convector has a display of room temperature and time, two operating modes (automatic and weekly mode), stable, adjustable feet to use the device flexibly in different locations, a wall mount, a display of operating hours and an extra-long power cable for maximum movability.
The TCH 1510 E Design Convector, certified in accordance with protection class IP24, can be used without hesitation in the bathroom, in shower rooms or similarly moist environments to which special protection measures apply.
And by the way, you can install the device with the wall mount included in delivery in no time at all, or remove it just as quickly and easily to make it a mobile standing device which could heat up a different area.
TCH 1510 E Design Convector – brand quality from Trotec!
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. Order the TCH 1510 E Design Convector today at our current offer price, reduced from £115.85 to just £67.73 incl. VAT – now in the Trotec Shop!
